Cross-Sector Collaboration to Improve Access to Community Services for People Living With Diabetes: Contributions From Actor-Network Theory.

Diabetes is a global public health issue. The Public Health Agency of Canada published a Diabetes Framework 2022 which recommends collaborative work across sectors to mitigate the impact of diabetes on health and quality of life. Since 2020, the INMED-COMMUNITY pathway has been implemented in Laval, Québec developing collaboration between healthcare and community sectors through a participatory action research approach. The aim of this article is to gain a better understanding of the INMED-COMMUNITY pathway implementation process, based on the mobilization of network actor theory. Qualitative analysis of semi-structured interviews conducted from January to March 2023 with 12 participants from 3 different sectors (community, health system, research), were carried out using actor-network theory. The results explored the conditions for effective intersectoral collaboration in a participatory action research approach to implement the INMED-COMMUNITY pathway. These were: (1) contextualization of the project, (2) a consultation approach involving various stakeholders, (3) creation of new partnerships, (4) presence of a project coordinator, and (5) mobilization of stakeholders around a common definition of diabetes. Mediation supported by a project coordinator contributed to the implementation of an intersectoral collaborative health intervention, largely due to early identification of controversies.

Identification and selection of food safety-related risk factors to be included in the Canadian Food Inspection Agency's Establishment-based Risk Assessment model for Hatcheries.

Towards the continuous improvement of its inspection system, the Canadian Food Inspection Agency (CFIA) is developing an Establishment-based Risk Assessment model for Hatcheries to allocate inspection resources based on the food safety risk associated with the Canadian hatcheries falling under its jurisdiction. The objectives of the current study were to identify and select critical food safety-related risk factors that would be included in this model, with a main focus on Salmonella. A literature review was used to develop a comprehensive list of risk factors that could potentially contribute to the food safety risk attributed to Canadian hatcheries operating in all production streams (breeders, layers, broilers, turkeys, waterfowl and game birds). The development of this list used a selection process that was conducted according to the availability of data sources, the clarity of definition and the measurability of the selected risk factors. A panel of experts reviewed and adjusted the identified risk factors. A final list of 29 risk factors was generated; 20 originated from the scientific literature and nine from the expert panel. Risk factors were grouped in three clusters according to whether they pertained to the inherent risk (nine factors identified), risk mitigation (nine factors identified) or compliance of a hatchery with its preventive control plan and regulatory requirements (11 factors identified). Criteria for assessing each risk factor were defined based on common practices used in the Canadian hatchery industry. This comprehensive list of risk factors and criteria represents useful information to support the design and implementation of a Canadian risk assessment model for hatcheries, but could also be used by like-minded food safety authorities.

Programmed Molecular Construction: Driving the Self-Assembly by Coordination and Hydrogen Bonds Using 6-(Pyridin-2-yl)-1,3,5-triazine-2,4-diamine with M(NO3)2 Salts.

A new series of hydrogen-bonded metallotecton networks 6-9 of the general formula [M(2)2(NO3)2] were obtained from the reaction of 6-pyridin-2-yl-[1,3,5]-triazine-2,4-diamine 2 with transition-metal ions [M: Co(II), Ni(II), Cu(II), and Zn(II)]. Their supramolecular networks and associated properties were characterized by single-crystal and powder X-ray diffraction, IR, solid-state UV-vis spectroscopy, and thermogravimetric analysis associated with differential scanning calorimetry. On the basis of standard patterns of coordination involving 2,2'-bipyridine and simple derivatives, compound 2 binds transition-metal ions with predictable constitution and the diaminotriazinyl (DAT) groups serve orthogonally to ensure the intermetallotecton interactions by hydrogen bonding according to well-established motifs I-III. As expected, compound 2 formed octahedral 2:1 metallotectons with M(NO3)2, and further self-assembled by hydrogen bonding of the DAT groups to produce pure, crystalline, homogeneous, and thermally stable materials. In these structures, nitrate counterions also play an important role in the cohesion of intermetallotectons to form two-dimensional and three-dimensional networks. These results illustrated the effectiveness of the synthetic approach to create a wide range of novel ordered materials with controllable architectures and tunable properties achieved by varying the central metal ion. Crystal morphologies of 6-9 were also investigated by scanning electron microscopy and calculation using Bravais-Friedel-Donnay-Harker method from their single-crystal structure.

Syntheses of mono and bimetallic cyamelurate polymers with reversible chromic behaviour.

Ordered coordination polymers (CPs) have been an interesting class of materials for scientific and industrial research for the last few decades. However, their availability as well as certain economic and environmental limitations could slow down their use in many applications. Herein, we present room temperature synthesis in water of a series of CPs (four metal-organic polymers MOPs-(1-4) and three mixed metal-organic polymers MMOPs-(5-7)). All MMOPs were found to be isostructural to MOPs as determined by XRD. Remarkably, MOPs-(2 and 3) and MMOPs-(5-7) exhibit switchable chromic behaviour associated with reversible structural transformation which was facilitated by dehydration/rehydration or solvent exchange (MeOH/H2O) processes. Chromic behaviour and its mechanism were investigated using IR, solid-state UV-Vis, XRD, PXRD and TGA indicating the coordination/de-coordination of water molecules to be the key factor that influences the colour changes. These results render the potential application of MOPs and MMOPs as sensor materials.

Cultivation of an algae-bacteria consortium in wastewater from an industrial park: Effect of environmental stress and nutrient deficiency on lipid production.

Adoption of microalgae-sourced products depends on the economic feasibility. In the case of fatty acids, it is crucial to obtain high lipid yield, especially in the form of storage lipids (TAGs). However, the production of these lipids often comes into competition with the microalgae biomass, resulting in a decrease in growth. A microalgae culture integration project was conducted in an industrial park in Canada in order to cultivate microalgae from park's wastewaters and then obtain products from the biomass. Different deficiencies and stresses were tested to evaluate what condition allowed the induction of the highest lipids accumulation without compromising the growth of microalgae. The results showed that the medium controlled to pH 7.0 allowed reaching the largest amount of extracted lipids (28 ±â€¯4.3%). Companies involved in this project could be able to make significant savings by the reduced wastewater treatment costs and by not adding expensive nutrients in culture.

Inducible dimerization and inducible cleavage reveal a requirement for both processes in caspase-8 activation.

Caspase-8 is a cysteine protease activated by membrane-bound receptors at the cytosolic face of the cell membrane, initiating the extrinsic pathway of apoptosis. Caspase-8 activation relies on recruitment of inactive monomeric zymogens to activated receptor complexes, where they produce a fully active enzyme composed of two catalytic domains. Although in vitro studies using drug-mediated affinity systems or kosmotropic salts to drive dimerization have indicated that uncleaved caspase-8 can be readily activated by dimerization alone, in vivo results using mouse models have reached the opposite conclusion. Furthermore, in addition to interdomain autoprocessing, caspase-8 can be cleaved by activated executioner caspases, and reports of whether this cleavage event can lead to activation of caspase-8 have been conflicting. Here, we address these questions by carrying out studies of the activation characteristics of caspase-8 mutants bearing prohibitive mutations at the interdomain cleavage sites both in vitro and in cell lines lacking endogenous caspase-8, and we find that elimination of these cleavage sites precludes caspase-8 activation by prodomain-driven dimerization. We then further explore the consequences of interdomain cleavage of caspase-8 by adapting the tobacco etch virus protease to create a system in which both the cleavage and the dimerization of caspase-8 can be independently controlled in living cells. We find that unlike the executioner caspases, which are readily activated by interdomain cleavage alone, neither dimerization nor cleavage of caspase-8 alone is sufficient to activate caspase-8 or induce apoptosis and that only the coordinated dimerization and cleavage of the zymogen produce efficient activation in vitro and apoptosis in cellular systems.

Genes to diseases (G2D) computational method to identify asthma candidate genes.

Asthma is a complex trait for which different strategies have been used to identify its environmental and genetic predisposing factors. Here, we describe a novel methodological approach to select candidate genes for asthma genetic association studies. In this regard, the Genes to Diseases (G2D) computational tool has been used in combination with a genome-wide scan performed in a sub-sample of the Saguenay-Lac-St-Jean (SLSJ) asthmatic familial collection (n = 609) to identify candidate genes located in two suggestive loci shown to be linked with asthma (6q26) and atopy (10q26.3), and presenting differential parent-of-origin effects. This approach combined gene selection based on the G2D data mining analysis of the bibliographic and protein public databases, or according to the genes already known to be associated with the same or a similar phenotype. Ten genes (LPA, NOX3, SNX9, VIL2, VIP, ADAM8, DOCK1, FANK1, GPR123 and PTPRE) were selected for a subsequent association study performed in a large SLSJ sample (n = 1167) of individuals tested for asthma and atopy related phenotypes. Single nucleotide polymorphisms (n = 91) within the candidate genes were genotyped and analysed using a family-based association test. The results suggest a protective association to allergic asthma for PTPRE rs7081735 in the SLSJ sample (p = 0.000463; corrected p = 0.0478). This association has not been replicated in the Childhood Asthma Management Program (CAMP) cohort. Sequencing of the regions around rs7081735 revealed additional polymorphisms, but additional genotyping did not yield new associations. These results demonstrate that the G2D tool can be useful in the selection of candidate genes located in chromosomal regions linked to a complex trait.

Discrimination between exosomes and HIV-1: purification of both vesicles from cell-free supernatants.

Although enveloped retroviruses bud from the cell surface of T lymphocytes, they use the endocytic pathway and the internal membrane of multivesicular bodies for their assembly and release from macrophages and dendritic cells (DCs). Exosomes, physiological nanoparticles produced by hematopoietic cells, egress from this same pathway and are similar to retroviruses in terms of size, density, the molecules they incorporate and their ability to activate immune cells. Retroviruses are therefore likely to contaminate in vitro preparations of exosomes and vice versa and sucrose gradients are inefficient at separating them. However, we have found that their sedimentation velocities in an iodixanol (Optiprep) velocity gradient are sufficiently different to allow separation and purification of both vesicles. Using acetylcholinesterase as an exosome marker, we demonstrate that Optiprep velocity gradients are very efficient in separating exosomes from HIV-1 particles produced on 293T cells, primary CD4(+) T cells, macrophages or DCs, with exosomes collecting at 8.4-12% iodixanol and HIV-1 at 15.6%. We also show that immunodepletion with an anti-acetylcholinesterase antibody rapidly produces highly purified preparations of HIV-1 or exosomes. These findings have applications in fundamental research on exosomes and/or AIDS, as well as in clinical applications where exosomes are involved, more specifically in tumour therapy or in gene therapy using exosomes generated from DCs genetically modified by transfection with virus.